Jumpers And Connectors; System Board Jumper Settings - Dell PowerEdge C8000 Hardware Owner's Manual

Jumpers and Connectors

This section provides specific information about the system jumpers. It also
provides some basic information on jumpers and switches and describes the
connectors on the various boards in the system.

System Board Jumper Settings

Figure 5-1. System Board Jumper Settings
Table 5-1. System Board Jumper Settings
Item Jumper
1 Service mode
Setting
(default) The flash security setting is enabled.
Description
The flash security and NVRAM clear
signal is disabled.
Jumpers and Connectors
5
195