Dell PowerEdge C8000 Hardware Owner's Manual page 71

Option
PCI Slot Configuration
PCIe Generation
(Gen3 default)
VT for Direct I/O
(Disabled default)
SR-IOV Global Enable
(Disabled default)
I/OAT DMA Engine
(Disabled default)
Maximum Payload Size
(Auto default)
Embedded Video Controller
(Enabled default)
Video Enumeration
(Onboard default)
WHEA Support
(Disabled default)
Reboot on WOL (ROW)
(Disabled default)
Description
Press <Enter> to configure PCI Express devices.
NOTE:
When you install a MIC GPGPU card in the C8220X
sled, BIOS automatically enables the PCI memory 64-bit
decode option.
Select a PCI signaling rate.
• Gen1: 2.5 GT/s
• Gen2: 5 GT/s
• Gen3: 8 GT/s
Enables or disables Intel hardware virtualization
support.
Enables or disables BIOS configuration of Single Root
I/O Virtualization (SR-IOV) devices.
If set to Enabled, the I/O Acceleration Technology
(I/OAT) feature is enabled for network controllers that
support this technology.
Sets the maximum payload size of the PCI Express
controller. Options are Auto, 128 bytes, and 256 bytes.
Enables or disables the onboard video controller.
NOTE:
This option should always be set to Enabled. The
remote KVM function cannot function if set to disabled.
Select video controller enumeration type.
• Onboard - The onboard video controller is used for
boot-time messages.
• Add-in - The first add-in video controller is used for
boot-time messages. Depending on the BIOS search
order and system slot layout.
Enables or disables the Windows Hardware Error
Architecture (WHEA) feature.
Enables or disables reboot on wake-on-LAN feature.
Reboot On WOL targets network controllers when the
network controller receives a magic packet. This option
displays when the network chip supports Reboot on
WOL feature.
Using the System Setup Program
71