Checking Connections And Switches; Look And Listen - Dell PowerEdge 4300 Installation And Troubleshooting Manual

2-2 Dell PowerEdge 4300 Systems Installation and Troubleshooting Guide
3. Perform the steps in "Checking Connections and Switches" found next in this
chapter.
Is the problem resolved?
Yes. The power to the computer system was faulty, or the connections to the
computer system were loose. You have fixed the problem.
No. Go to step 4.
4. Follow the procedures described in "Look and Listen" found later in this chapter.
Did the computer system complete the boot routine?
Yes. Go to step 5.
No. A serious malfunction may have occurred. Go to Chapter 11, "Getting Help."
5. Did you receive a system message or beep code?
Yes. Go to Chapter 3, "Messages and Codes."
No. Go to step 6.
6. Verify the settings in the System Setup program as explained in "The System
Setup Program" found later in this chapter.
Is the problem resolved?
Yes. The system configuration information was incorrect. You have fixed the
problem.
No. Go to step 7 .
7 . Run the Dell Diagnostics as described in Chapter 5, "Running the Dell
Diagnostics."