Dell PowerEdge 4300 Installation And Troubleshooting Manual page 44

3-14 Dell PowerEdge 4300 Systems Installation and Troubleshooting Guide
NOTE: For the full name of an abbreviation or acronym used in this table, see the abbreviations and
acronyms list that precedes the Index.
A failure of one or more
fans was detected by the
thermal-monitoring facil-
ity in the specified server.
If possible, the chassis
number and fan number
are provided.
A fan sensor reading on
the specified server has
exceeded the user-
settable warning
thresholds. If possible,
the chassis number and
fan number are provided.
An ECC error has
occurred in system
memory.
Check for a possible
blockage of or in-
adequate ventilation
around the fan. If the fan
is not blocked and venti-
lation is adequate, check
fan connections. If the
problem is still not
resolved, see Chapter 11,
"Getting Help," for
instructions on obtaining
technical assistance.
Check for a possible
blockage of or in-
adequate ventilation
around the fan. If the fan
is not blocked and venti-
lation is adequate, check
fan connections. If the
problem is still not
resolved, see Chapter 11,
"Getting Help," for
instructions on obtaining
technical assistance.
Run the appropriate
memory test(s) from the
Dell Diagnostics. See
Chapter 5, "Running the
Dell Diagnostics," for
more information.