Dell PowerEdge 4300 Installation And Troubleshooting Manual page 96

thumbscrews (2)
support panel
To access the backplane board or the PSPB, you must open the system board tray to
the service position (see Figure 7-6). To open the system board tray, release the tray
latch at the lower-back corner of the tray and pull the tray open to the first slide posi-
tion. To remove the tray completely, pull the tray slightly outward (or upward if the
system is mounted horizontally) to clear the slide catch and then pull the tray out of
the chassis.
7-8 Dell PowerEdge 4300 Systems Installation and Troubleshooting Guide