C Hecking Connections And Switches - Dell 4100 Installation And Troubleshooting Manual

6. Verify the settings in the System Setup program
as explained in "The System Setup Program"
found later in this chapter.
Is the problem resolved?
Yes. The system configuration information was
incorrect. You have fixed the problem.
No. Go to step 7.
7. Run the system diagnostics as described in Chap-
ter 5.
2-2 Dell PowerEdge 4100/180 and 4100/200 Systems Installation and Troubleshooting Guide
C
hecking Connections and
Switches
Improperly set switches and controls and loose or
improperly connected cables are the most likely source of
problems for the computer, monitor, or other peripherals
(such as a printer, keyboard, mouse, or other external
equipment). A quick check of all the switches, controls,
and cable connections can easily solve these problems.
Figure 2-1 shows the back panel connections on the com-
puter. Figure 2-2 shows the switches and controls on the
computer.