Scsi Cable - Dell PowerEdge 4300 Installation And Troubleshooting Manual

10-8 Dell PowerEdge 4300 Systems Installation and Trubleshooting Guide
devices. Refer to the User's Guide for information about which option to choose
to enable the proper boot sequence for the adapter.
5. Connect the Ultra2/LVD SCSI interface cable provided in the host adapter card kit
to the connector labeled "SCSI" on the SCSI backplane board.
6. Connect the other end of the Ultra2/LVD SCSI interface cable to the host adapter
card.
To identify the correct connector, refer to documentation for the host adapter
card.
NOTE: If you will be attaching external SCSI devices using an optional SCSI
external-access cable, follow steps 7 through 10. If you have not purchased this
cable, go to step 11.

SCSI hard-disk
drive bays (6)
hot-pluggable
SCSI backplane
board
Ultra2/LVD SCSI
cable connector
(SCSI)
Ultra2/LVD SCSI
interface cable
host adapter card
optional SCSI external-access cable
7 . If you ordered an optional SCSI external-access cable, connect this cable to the
Ultra2/LVD SCSI connector (labeled "SCSI1") on the system board.
See each device's documentation for information on cabling that device as part of
a daisy chain.
Ultra2/LVD SCSI
connector (SCSI1)