Dell PowerEdge 4300 Installation And Troubleshooting Manual page 46

3-16 Dell PowerEdge 4300 Systems Installation and Troubleshooting Guide
NOTE: For the full name of an abbreviation or acronym used in this table, see the abbreviations and
acronyms list that precedes the Index.
A temperature probe on
the backplane board, sys-
tem board, or drive carrier
in the specified server has
exceeded its temperature
failure range. If possible,
the chassis number and
probe number are
provided.
A temperature probe on
the backplane board, sys-
tem board, or drive carrier
in the specified server has
exceeded its temperature
warning range. If possible,
the chassis number and
probe number are
provided.
A failure has occurred
with the system power
supply or voltage probe(s)
on the system board. If
possible, the chassis num-
ber and probe number are
provided.
The voltage probe on the
backplane board, system
board, or power supply for
the specified server has
exceeded its warning
range. If possible, the
chassis number and probe
number are provided.
Check for a fan failure. If
needed, replace the fan.
Otherwise, turn off the
system and call Dell. See
Chapter 11, "Getting
Help," for instructions on
obtaining technical
assistance.
Make sure the fan
thresholds are set in a
reasonable range. Check
for a fan failure. Make
sure the computer cover
is properly installed. If
the problem persists,
turn off the system and
see Chapter 11, "Getting
Help," for instructions on
obtaining technical
assistance.
Check the power supply
and backplane board con-
nections. If the power
supply is connected
properly, see Chapter 11,
"Getting Help," for
instructions on obtaining
technical assistance.
Make sure the user-
settable voltage
thresholds are set cor-
rectly. If the problem
persists, check the
power supply and
backplane board connec-
tions. If the power supply
is connected properly,
see Chapter 11, "Getting
Help," for instructions on
obtaining technical
assistance.