Cleaning Carrier Sheet - Fujitsu Fi-5110EOX2 - ScanSnap! - Document Scanner Operator's Manual

6.4

Cleaning Carrier Sheet

While using the Carrier Sheet continuously, dirt and dust may stick onto the surface or the
interior.
When you use th Carrier Sheet continuously, please clean it regularly as that may be the cause of
scanning error.
Cleaning method
Use a dry soft cloth or a soft cloth slightly moistened with Cleaner F1 (sold separately) or a mild
detergent to lightly clean off the dirt and dust from the surface and the interior of the Carrier Sheet.
ATTENTION
•
Never use paint thinner or other organic solvents.
•
Do not rub too hard. Otherwise, the Carrier Sheet may be scratched or be
deformed.
•
After cleaning the interior of the Carrier Sheet with Cleaner F1 or a mild
detergent, close the Carrier Sheet after it has completely dried.
•
As a guideline, it is recommended to replace the Carrier Sheet every 500
scans.
Refer to "7.4 Purchasing Carrier Sheet" (page 161) for for details on
purchasing an Carrier Sheet.
ScanSnap fi-5110EOX2 Operator's Guide

6.4 Cleaning Carrier Sheet

6
139