Flow Of Operations; Preparation - Fujitsu Fi-5110EOX2 - ScanSnap! - Document Scanner Operator's Manual

3.1

Flow of Operations

This section describes the flow of operations starting with the scanning of documents on ScanSnap
to the saving of scanned images in PDF format.

■ Preparation

Operation
1. Make sure that the AC cable is connected to the scanner.
2. Make sure that the scanner is correctly connected to your PC.
HINT
3. Turn on your PC.
⇒
The "ScanSnap Manager" icon appears when Windows is started up.
4. Open the paper chute cover.
⇒
The scanner is turned on and the "ScanSnap Manager" icon will change from
HINT
24
You can connect the scanner to your computer after turning it on. When the
scanner is already connected to your PC, you do not need to reconnect it.
If the scanner is not automatically turned on even when the paper chute cover
is opened, push the [POWER] button on the scanner.
Paper chute cover
[POWER] button
to .
S S S
S