Scanning Documents - Fujitsu Fi-5110EOX2 - ScanSnap! - Document Scanner Operator's Manual

■ Scanning documents

Operation
1. Make sure that the "ScanSnap Manager" icon is displayed on the task bar.
If the "ScanSnap Manager" icon is not displayed on the task bar, select [Pro-
HINT
grams] - [ScanSnap Manager] - [ScanSnap Manager] from the [Start] menu to
start up "ScanSnap Manager".
Generally, "ScanSnap Manager" is registered under "Startup" programs, so its
icon is displayed on the tasktray when Windows is started up. If it is not regis-
tered under "Startup" programs, select [All Programs] - [ScanSnap Manager] -
[Startup Register] from [Start] menu in order to register it.
2. Load the document onto the scanner.
Refer to "3.2 Scanning Different Document Types" (page 30) and "3.3 Loading Documents"
(page 33).
SCAN
3. Press
⇒
This starts the scanning.
As the default setting, documents are scanned with the "Duplex" mode when
HINT
you press the [SCAN] button. With "ScanSnap Manager", you can set the scan-
ner to scan documents using "Simplex" mode by pressing the [SCAN] button.
•
ATTENTION
•
⇒
The lamp on the scanner lights green during the scanning operation.
The following window appears to indicate the scanning status.
([SCAN] button).
Do not connect or disconnect other USB devices during the scanning opera-
tion.
Do not close the paper chute cover or press the [POWER] button on the scan-
ner during the scanning operation.
ScanSnap fi-5110EOX2 Operator's Guide
3.1 Flow of Operations
25
3