Loading Documents; How To Load Documents - Fujitsu Fi-5110EOX2 - ScanSnap! - Document Scanner Operator's Manual

3.3

Loading Documents

This section describes how to load documents onto the scanner.

■ How to load documents

1. Align the edges of the document.
Align the edges of the document as follows:
1) Straighten the edges of the document.
2) Check the number of the sheets in the document stack.
HINT
To prevent paper jams, fan the document as follows:
1) Take out the stack of documents of thickness 5 mm or less.
2) Hold both ends of the document with both hands, and bend the documents into an
arch.
Straighten both edges of the document stack for scanning it correctly.
The standard number of sheets that can be loaded on the scanner is as follows:
For A4-size paper or smaller, a document stack of 5 mm or less (50 sheets at 64
2
.
g/m or at 17 lb)
Scanning accuracy increases when
the document is loaded onto the
scanner so that the leading edges
of the papers form a step-like pat-
tern as shown in the figure.
For the picture on the top-right, if the check box is selected on "Allow
documents to be scanned face up through the ADF" of "Option" of
the "Scanning" tab on "Scan and Save Settings", the document faces
up and scanning the bottom edge becomes the scanning direction.
ScanSnap fi-5110EOX2 Operator's Guide

3.3 Loading Documents

Step-like
Scanning direction
5mm
3
33