Fujitsu Fi-5110EOX2 - ScanSnap! - Document Scanner Operator's Manual page 25

•
ScanSnap may not function if it is connected to the USB ports for the keyboard
ATTENTION
or monitor.
•
If you are using a commercially available USB hub, use a type equiped with an
AC adapter.
•
If you connect the scanner with USB 2.0, it is required that the USB port and
the Hub are compliant with USB 2.0. The scanning speed may slow down
when you connect the scanner with USB 1.1. If your computer has the USB
2.0 compatible port, please use it.
Refer to the following list for USB 2.0 support.
•
If the CPU and the memory do not meet the required specification, the scan-
ning speed will be down.
■ Free disk space
•
ScanSnap Manager
•
ScanSnap Organizer
•
CardMinder
•
Adobe Acrobat 7.0
•
PDF Thumbnail View
■ USB 2.0 support
On-board PC
interface
Expansion
card interfaces
* USB 2.0 driver supplied by Microsoft Corporation is required for the usage of the above.
2. Make sure that ScanSnap is disconnected from your personal computer.
3. Start up your personal computer.
When using Windows 2000 or Windows XP, log on as a user with "Administrator" privi-
leges (computer administrator privileges when using Microsoft Windows XP Home Edition
operation system)
4. Close all currently running programs.
50 Mbytes
70 Mbytes
120 Mbytes
360 Mbytes
Windows 98
Windows 98
(2nd Edition)
ScanSnap fi-5110EOX2 Operator's Guide
2.1 Installing ScanSnap
5 Mbytes
Windows
Windows Me
2000
2
Windows XP
7