Fujitsu Fi-5110EOX2 - ScanSnap! - Document Scanner Operator's Manual page 63

7. Press the [SCAN]
⇒
Scanning starts, and the image data is generated in the specified size.
•
ATTENTION
•
If the following symptoms are observed, place a piece of white paper
behind the document.
HINT
•
•
•
SCAN
button.
The output image is generated with the scanned document image
placed in the center of the specified size of the output image.
In the "Carrier Sheet Settings" window, when "Automatic Detection" in
"Output image size" is selected, an ideal size among the standard
sizes is selected automatically (refer "3.6 Changing Carrier Sheet Set-
tings" (page 72)).
In the "Carrier Sheet Settings" window, when "Automatic Detection" in
"Output image size" is selected, the generated image size may be
smaller than the document.
Example: If A5 size image is printed in the center of an A4 document
=>it is generated in A5.
To output an image that is the same size as the document size, set the
document size in "Output image size".
The scanned document cannot be generated in a suitable size (in
[Automatic Detection])
A shadow appears on the edges of the document
Black lines appear around the document that is cut into an unusual
shape
ScanSnap fi-5110EOX2 Operator's Guide
3.3 Loading Documents
white paper
3
45