Fujitsu Fi-5110EOX2 - ScanSnap! - Document Scanner Operator's Manual page 62

Operation
5. Open the Carrier Sheet and place the document inside.
Align the top of the document so that it
touches the top of the Carrier Sheet.
Place the document on its width in the
center, in order not to protrude out of the
Carrier Sheet.
6. Load the Carrier Sheet onto the scanner.
•
Place the top of the sheet with the black
& white printed pattern downwards and
load it in the direction of the arrow.
•
When you load the Carrier Sheet, adjust
the side guides so that the document
inside will not skew.
•
If you are using the Carrier Sheet for
scanning, it is not possible to scan
multiple sheets continuously. Load the
sheets one by one and scan.
ATTENTION
44
If the check box for "Allow documents to be scanned face up through the
ADF" of [Scanning] - [Options] in the "Scan and Save Settings" window
of ScanSnap Manager is selected, set the front of the document with the
top edge face-up.