Fujitsu Fi-5110EOX2 - ScanSnap! - Document Scanner Operator's Manual page 148

(*1): For Windows XP, From "Device Manager", right click on computer name an perform
"Scan for hardware changes".
(*2) - Confirm PC and ScanSnap are powered on and connected properly.
- From Device Manager, check if ScanSnap is recognized as unknown device. If so, delete it
from [Control Panel] - [System].
- Close ScanSnap Manager
- Go to [Control Panel] - select [Add or remove Programs] and uninstall ScanSnap Manager
and ScanSnap Organizer. (Refer to "4.1 Uninstalling Supplied Programs" (page 118)")
- Before restart the PC, remove the following folders.
ATTENTION
For Windows 2000, Windows XP:
Delete the folder ScanSnap under:
⇒
Delete the folder Driver under:
⇒
For Windows 98, ME:
Delete the folder Driver under:
⇒
After you have removed the above given folders, please confirm if the files
in the folder C:/Windows/Inf have been deleted. If this is not the case, please remove also these
two files.
HINT
130
After the uninstallation of ScanSnap Manager, delete the following folders and
files before restarting your computer.
Pay extra attention not to remove any other folders or files, since this will effect
your system environment.
c:/Documents and Settings/<User name>/Application Data/PFU/
c:Program Files/PFU/ScanSnap/
c:Program Files/PFU/ScanSnap/
- fi5110e.INT
- fi5110e.PNF
Please note, that the folder C:/Windows/Inf may be hidden. To confirm the
above given two files and remove them, please select from the menu bar of the
[Explorer] - [Tools]-[Folder Options...] and select then the [View] tab. In this tab,
please check if the checkbox of [Show hidden files and folders] under [Hidden
files and folders] is marked. After marking this checkbox and applying the set-
ting, the hidden C:/Windows/Inf folder becomes visible and you can check if
the fi5110e.INT and fi5110e.PNF files are existing. If they do, please remove
them.