Security Audit Log menu
Do not delete
Enable Remote Syslog
Remote Syslog Facility
Severity of events to log
Set Date/Time menu
<list of time zones>
Enables an authorized user to export the security log
To export the log from the printer control panel, a flash drive must be attached
to the printer.
From the Embedded Web Server, the log can be downloaded to a computer.
Specifies whether audit logs are deleted
Note: Delete Now is the factory default setting.
Specifies whether and how the audit logs are created
Enable audit determines if events are recorded in the secure audit log and
remote syslog. No is the factory default setting.
Enable remote syslog determines if logs are being sent to a remote server. No
is the factory default setting.
Remote syslog facility determines the value used to send logs to the remote
syslog server. 4 is the factory default setting.
With the security audit log activated, the severity value of each event is
recorded. 4 is the factory default setting.
Lets you view the current date and time settings for the printer
Note: Date/Time is set in YYYY-MM-DD HH:MM format.
Note: GMT is the factory default setting.
Note: On is the factory default setting and uses the applicable Daylight Saving Time
associated with the Time Zone setting.
Enables Network Time Protocol, which synchronizes the clocks of devices on a
Note: On is the factory default setting.
Understanding printer menus