Default Source menu
Paper Size/Type menu
Tray <x> Size
Appears only if Tray Size Sensing is turned off.
Note: Only installed trays, drawers, and feeders are listed in this menu.
Sets a default paper source for all print jobs
Tray 1 (standard tray) is the factory default setting.
Only an installed paper source will appear as a menu setting.
A paper source selected by a print job will override the Default Source
setting for the duration of the print job.
If the same size and type of paper are in two trays and the Paper Size and
Paper Type settings match, then the trays are automatically linked. When
one tray is empty, the job prints using the linked tray.
From the Paper menu, Configure MP must be set to Cassette in order for
MP Feeder to appear as a menu setting.
Specifies the paper size loaded in each tray
A4 is the international factory default setting. Letter is the US factory
For trays with automatic size sensing, only the size detected by the
Use this menu item to configure automatic tray linking. If the same size
and type of paper are in two trays and the Paper Size and Paper Type
settings match, then the trays are automatically linked. When one tray
is empty, the job prints using the linked tray.
Automatic size sensing is not supported for Oficio, Folio, or Statement
The 2000-sheet tray supports A4, Letter, and Legal paper sizes.
Understanding printer menus