Tray <x> Type
Custom Type <x>
MP Feeder Size
7 3/4 Envelope
Appears only if Tray Size Sensing is turned off.
Note: Only installed trays, drawers, and feeders are listed in this menu.
Specifies the type of paper loaded in each tray
Plain Paper is the factory default setting for Tray 1. Custom Type <x> is
the factory default setting for all other trays.
If available, a user-defined name will appear instead of Custom Type <x>.
Use this menu item to configure automatic tray linking. If the same size
and type of paper are in two trays and the Paper Size and Paper Type
settings match, then the trays are automatically linked. When one tray
is empty, the job prints using the linked tray.
Specifies the paper size loaded in the multipurpose feeder
From the Paper menu, Configure MP must be set to Cassette in order for
MP Feeder Size to appear as a menu item.
A4 is the international factory default setting. Letter is the US factory
The multipurpose feeder does not automatically sense paper size. The
paper size value must be set.
Understanding printer menus