Table of Contents
Advertisement
Menu item
Offset Pages
None
Between Jobs
Between Copies
Quality menu
Menu item
Print Resolution
300 dpi
600 dpi
1200 dpi
1200 Image Q
2400 Image Q
Pixel Boost
Off
Fonts
Horizontally
Vertically
Both Directions
Toner Darkness
1–10
Enhance Fine Lines
On
Off
Gray Correction
Auto
Off
Description
Stacks copies or print jobs into staggered sets in an output bin
Notes:
•
This menu item appears only when the Staple Finisher is installed.
•
None is the factory default setting. No pages are offset during the print job.
•
Between Jobs offsets each print job.
•
Between Copies offsets each copy of a print job.
Description
Specifies the printed output resolution
Note: 600 dpi is the factory default setting. The printer driver default is 1200 IQ.
Enhances the printed quality of small fonts and graphics
Notes:
•
Off is the factory default setting.
•
Fonts applies this setting only to text.
•
Horizontally darkens horizontal lines of text and images.
•
Vertically darkens vertical lines of text and images.
•
Both Directions darkens horizontal and vertical lines on text and images.
Lightens or darkens the printed output
Notes:
•
8 is the factory default setting.
•
Selecting a smaller number can help conserve toner.
Enables a print mode preferable for files such as architectural drawings, maps, electrical
circuit diagrams, and flow charts
Notes:
•
Off is the factory default setting.
•
To set Enhance Fine Lines using the Embedded Web Server, type the network
printer IP address in a browser window.
Adjusts the gray value of printed output
Note: Auto is the factory default setting.
Understanding printer menus
120
Advertisement
Table of Contents
