Installing A Flash Memory Or Firmware Card - Dell 5230 User Manual

2
Unpack the memory card.
Note: Avoid touching the connection points along the edge of the card.
3
Open the memory card connector latches.
4
Align the notches on the memory card with the ridges on the connector.
1 Notches
2 Ridges
5
Push the memory card straight into the connector until it snaps into place.
6
Replace the system board cover and close the system board door.

Installing a flash memory or firmware card

Note: This task requires a flathead screwdriver.
1
Additional printer setup
22
2
1
2
3