Download  Print this page

Advertisement

Menu item
Run Initial setup
Yes
No
Paper Sizes
US
Metric
Output Lighting
Normal/Standby Mode
Bright
Dim
Off
Power Saver
Bright
Dim
Off
Alarms
Alarm Control
Cartridge Alarm
Staple Alarm
Description
Instructs the printer to run the setup wizard
Notes:
Yes is the factory default setting.
After completing the setup wizard by selecting Done at the
Country select screen, the default becomes No.
Notes:
Initial setting is determined by your Country selection in the
initial setup wizard.
Changing this setting also changes the Units of Measurement
setting in the Universal Setup menu and the default for each
input source in the Paper Size/Paper Type menu.
Sets the amount of light from an optional output bin
Notes:
In Normal/Standby Mode, the factory default is Bright.
In Power Saver Mode, the factory default is Dim.
Sets an alarm to sound when the printer requires operator
intervention
Available selections for each alarm type are:
Off
Single
Continuous
Notes:
Single is the factory default setting for Alarm Control. Single
sounds three quick beeps.
Off is the factory default setting for Cartridge Alarm and
Staple Alarm. Off means no alarm will sound.
Continuous repeats three beeps every 10 seconds.
Staple Alarm is available only when the finisher is installed.
Understanding printer menus
114

Advertisement

Table of Contents

   Also See for Dell 5230

   Related Manuals for Dell 5230

This manual is also suitable for:

53505230dn5350dn5230n

Comments to this Manuals

Symbols: 0
Latest comments: