Download  Print this page

Advertisement

Menu item
Robust XON
On
Off
Baud
1200
2400
4800
9600
19200
38400
57600
115200
138200
172800
230400
345600
Data Bits
7
8
Parity
Even
Odd
None
Ignore
Honor DSR
On
Off
Description
Determines whether or not the printer communicates availability to the computer
Notes:
Off is the factory default setting.
This menu item applies only to the serial port if Serial Protocol is set to
XON/XOFF.
Specifies the rate at which data can be received through the serial port
Notes:
9600 is the factory default setting.
138200, 172800, 230400, and 345600 baud rates are displayed only in the
Standard Serial menu. These settings do not appear in the Serial Option or Serial
Option 2 menus.
Specifies the number of data bits that are sent in each transmission frame
Note: 8 is the factory default setting.
Sets the parity for serial input and output data frames
Note: None is the factory default setting.
Determines whether the printer uses the DSR Signal. DSR is a handshaking signal
used by most serial cables.
Notes:
Off is the factory default setting.
The serial port uses DSR to distinguish data sent by the computer from data
created by electrical noise in the serial cable. The electrical noise can cause stray
characters to print. Select On to prevent stray characters from printing.
This menu item appears only if Serial RS-232/RS-422 is set to RS 232.
Understanding printer menus
109

Advertisement

Table of Contents

   Also See for Dell 5230

   Related Manuals for Dell 5230

This manual is also suitable for:

53505230dn5350dn5230n

Comments to this Manuals

Symbols: 0
Latest comments: