Download  Print this page

Changing A Custom Type Name - Dell 5230 User Manual

Laser printers.
Hide thumbs

Advertisement

6
Press
.
The Paper Size menu appears.
7
Press
again.
The Paper Type menu appears.
8
Press the left or right arrow button until
press
.
Submitting selection appears, followed by Paper Menu.
9
Verify that the correct Paper Type is associated with the custom name.
Note: Plain Paper is the factory default Paper Type associated with all Custom Type <x> names and user-defined
custom names.
a
From the Paper menu, press the up or down arrow button until
.
b
Press the up or down arrow button until
.
c
Press the up or down arrow button until
.
Submitting selection appears.
Changing a Custom Type <x> name
If the printer is on a network, you can use the Embedded Web Server to define a name other than Custom Type <x>
for each of the custom paper types that are loaded. When a Custom Type <x> name is changed, the menus display
the new name instead of Custom Type <x>.
To change a Custom Type <x> name:
1
Type the printer IP address into the address field of your Web browser.
Note: If you do not know the IP address of the printer, print a network setup page and locate the address in the
TCP/IP section.
2
Click Settings.
3
Click Paper Menu.
4
Click Custom Name.
5
Type a name for the paper type in a Custom Name <x> box.
Note: This custom name will replace a custom type <x> name under the Custom Types and Paper Size and Type
menus.
6
Click Submit.
7
Click Custom Types.
Custom Types appears, followed by your custom name.
8
Select a Paper Type setting from the pick list next to your custom name.
9
Click Submit.
Custom Type <x> or another custom name appears, and then
appears next to the custom paper type name, and then press
appears next to the Paper Type setting you want, and then press
Loading paper and specialty media
66
Custom Types appears, and then press

Advertisement

Table of Contents

   Also See for Dell 5230

   Related Manuals for Dell 5230

This manual is also suitable for:

53505230dn5350dn5230n

Comments to this Manuals

Symbols: 0
Latest comments: