Security Audit Log Menu; Set Date/Time Menu - Dell 5330 User Manual

Menu item
Scheduled Method
Single pass
Multiple pass

Security Audit Log menu

Menu item
Export Log
Delete Log
Delete now
Do not delete
Configure Log
Enable Audit
Enable Remote Syslog
Remote Syslog Facility
Severity of events to log

Set Date/Time menu

Menu item
View Date/Time
Set Date/Time
<input date/time>
Time Zone
<list of time zones>
Description
Disk Wiping erases only print job data that is not currently in use by the file system
from the printer hard disk. All permanent data on the printer hard disk is preserved,
such as downloaded fonts, macros, and held jobs.
Both manual and scheduled wiping allow the file system to reuse marked disk space
without first having to wipe it.
Notes:
This menu item appears only if a formatted, non-defective printer hard disk is
•
installed.
Single pass is the default setting.
•
Highly confidential information should be wiped using the Multiple Pass
•
method only.
Scheduled wipes are initiated without displaying a user warning or
•
confirmation message.
Description
Enables an authorized user to export the security log
Notes:
To export the log from the printer control panel, a flash drive must be attached
•
to the printer.
From the Embedded Web Server, the log can be downloaded to a computer.
•
Specifies whether audit logs are deleted
Note: Delete Now is the factory default setting.
Specifies whether and how the audit logs are created
Note: Factory default settings enable the security audit log.
Description
Lets you view the current date and time settings for the printer
Note: Date/Time is set in YYYY-MM-DD HH:MM format.
Note: GMT is the factory default setting.
Understanding printer menus
122