Entering The Date And Time - Canon 3301B002 On-Screen Manual

Entering the Date and Time

> Setting Up the Machine
Contents
Entering the Date and Time
Note
Three date display formats are available: YYYY/MM/DD, MM/DD/YYYY, and DD/MM/YYYY.
For details, refer to the on-screen manual:
When the machine is connected to a computer with the MP Drivers installed, the date and time
setting will be copied from the computer to the machine. As long as the date and time is set
accurately on your computer, you do not need to set it on the machine.
If you disconnect the power plug or when there is a power failure, the date and time setting on the
machine will be reset. When you connect the machine to a computer with the MP Drivers installed,
the setting will be copied to the machine once again.
1.
Display the Date/time setting screen.
Press the FAX button, and press the Menu button.
(1)
Use the (Left) or
(2)
button.
Use the (Left) or
(3)
button.
OK
Use the (Up) or
(4)
button.
Use the (Up) or
(5)
button.
Use the (Up) or
(6)
button.
OK
2.
Enter the date and time.
Use the Numeric buttons to enter the date and time (in 24-hour format).
(1)
Enter only the last two digits of the year.
Note
You can also use the
If you misentered the date and time, press the
cursor under the number to enter the correct number.
Press the OK button.
(2)
3.
Return to the fax standby screen.
Press the FAX button.
(1)
>
Specifying the Basic Settings for the Machine
Advanced Guide .
(Right) button to select Settings
(Right) button to select Device settings
(Down) button to select FAX settings, and press the OK
(Down) button to select User settings, and press the OK
(Down) button to select Date/time setting, and press the
(Up) or (Down) button to change the number.
(Left) or
Advanced Guide Troubleshooting
> Entering the Date and Time
, and press the OK
, and press the
(Right) button to move the
Page 27 of 997 pages