Canon 3301B002 On-Screen Manual page 952

Changing the Settings in the Wireless LAN Sheet
Key Format
2.
Key Length
Select either 64bit or 128bit.
3.
Key Format
Select either ASCII or Hex.
4.
Key ID
Select the Key ID (index) set to the access point.
5.
Authentication
Select the authentication method to authenticate the printer's access to the access point.
Normally, select Auto. If you want to specify the method manually, select Open System or
Shared Key according to the setting of the access point.
Important
If the printer cannot communicate with the computer after the encryption type of the printer
was switched, make sure that encryption types for the computer and the access point
matches that set to the printer.
How to Set a WEP/WPA/WPA2 Key
ASCII
Hexadecimal (Hex)
5 characters 13 characters
10 digits 26 digits
Page 952 of 997 pages
Page top