Canon 3301B002 On-Screen Manual page 418

Saving Scanned Data on the USB Flash Drive/Memory Card Using the Ope...
details, refer to Importing Images Saved on a Memory Card
Importing the Scanned Data Saved on the USB Flash Drive to the Computer
You can import the scanned data saved on the USB flash drive to the computer.
After scanning the data, connect the USB flash drive to the computer, then import the data using
Windows Explorer.
You can import the scanned data saved on the USB flash drive to the computer.
After scanning the data, connect the USB flash drive to the computer, then import the data.
Inserting the USB Flash Drive
Important
Before inserting the USB flash drive:
You may need an extension cable if the USB flash drive cannot be inserted into the
Direct Print Port of the machine. For details, ask an electronics store.
Depending on the type of USB flash drive, the operation may not be guaranteed.
Some USB flash drives with security settings may not be used.
1.
Insert the USB flash drive in the Direct Print Port.
Make sure that the USB flash drive is correctly oriented before inserting it straightforward into
the Direct Print Port.
Removing the USB Flash Drive
1.
Make sure that the machine is not writing data to the USB flash drive.
Check if the writing operation is completed on the LCD.
Important
Do not remove the USB flash drive or turn off the power while the machine is operating.
Note
If you use the USB flash drive with the access lamp, refer to the instruction manual
supplied with the USB flash drive to check if the writing operation is completed on the
USB flash drive.
2.
Remove the USB flash drive.
Hold the USB flash drive and remove it from the machine straightforward.
.
Page 418 of 997 pages
Page top