Canon 3301B002 On-Screen Manual page 82

Sending Faxes
1.
Display the One-touch speed dial screen.
Press the FAX button, and press the Menu button.
(1)
Use the (Left) or
(2)
press the OK button.
Use the (Up) or
(3)
the OK button.
2.
Register a recipient's number to the one-touch speed dial.
Use the (Up) or
(1)
dial number (01 to 05), and press the
Note
Select an unoccupied number to register a new recipient's number.
The message asking whether to edit or delete the registered information will appear if an
occupied number is selected.
Use the Numeric buttons to enter a recipient's name (max. 16 characters,
(2)
including spaces).
Press the OK or
(3)
Use the Numeric buttons to enter the recipient's fax/telephone number (max. 60
(4)
digits (40 digits for Korea), including spaces).
Press the OK button.
(5)
The registered name will appear at the selected number on the One-touch speed dial screen.
Note
Press the FAX button to save the registered information and will return to the fax standby
screen.
Adjusting the Sending Quality
You can adjust the image quality (fax resolution) or density (scan contrast) of the document you send.
The higher you set the image quality setting, the better the output quality will be at the other end, but the
longer it will take for the transmission. Contrast is the degree of difference between light and dark.
Increasing the scan contrast thickens the whole fax image, or light penciled texts and such can be
thickened. Adjust the image quality and density according to the type of document you are sending.
1.
FAX button, and press the FAX Quality button.
Press the
(Right) button to select TEL number registration
(Down) button to select One-touch speed dial, and press
(Down) button to select an unoccupied one-touch speed
button.
OK
(Down) button.
Page 82 of 997 pages
, and