Canon 3301B002 On-Screen Manual page 801

LAN settings
Subnet mask
Subnet prefix length
Default gateway
MAC address
IPsec Settings
Security protocol
Pre-shared key
("X" represents an alphanumeric character ranging from 0 to 9 and A to F.)
IPv4/IPv6 setting
Selects the IP version (IPv4 or IPv6). It is recommended to use the machine with IPv4.
WSD setting
Activates/inactivates the WSD (one of the network protocols supported in Windows Vista) setting.
Note
When you set WSD setting to Enable, the printer icon is displayed on the Network Explorer in
Windows Vista.
Print LAN details
You can print out the network settings of the machine such as its IP address and SSID.
For more information on the machine's network setting is printed out, refer to
.
Setting Information
Important
This print out contains valuable information about your computer. Handle it with care.
Reset LAN settings
Initializes the network settings on the machine.
Important
Note that initialization erases all connection settings with computers, and printing or scanning
operation may become impossible. To use the machine over network, refer to your setup
manual. Be careful when you initialize the network settings on the machine.
Note
When you initialize the network settings using the Canon IJ Network Tool, refer to
Network Settings of the Machine
XXX. XXX. XXX. XXX
-
XXX. XXX. XXX. XXX
XX:XX:XX:XX:XX:XX
-
-
-
.
Page 801 of 997 pages
XXX. XXX. XXX. XXX
-
XXX
XXX. XXX. XXX. XXX
XX:XX:XX:XX:XX:XX
Active/Inactive
ESP/ESP & AH/AH
XXXXXXXXXXX
Printing Out Network
Initializing the
Page top