Entering The Date And Time - Canon PIXMA MP830 User Manual

Entering the Date And Time

Note
When your machine is connected to a computer with the MP Drivers installed, the date and
time will be read from your computer every time you start the computer, turn the machine on,
or connect the USB cable.
The date and time will be reset when you disconnect the power cord or there is a power
failure. In this case, you can set it again on the machine. Alternatively, it can be read from
your computer and set on the machine by connecting the machine to your computer with the
MP driver installed.
1
Display the FAX menu.
"Display the FAX menu." on page
See
2
Display the Device settings screen.
"Display the Device settings screen." on page
See
3
Display the User settings screen.
"Display the User settings screen." on page
See
4
Display the Date/time setting screen.
Use [ ] or [
5
Enter the date and time.
(1) Use the Numeric buttons to enter the date and time (in 24-hour format), then press [OK].
Enter only the last two digits of the year.
Note
If you misentered the date and time, use [
number to enter the correct number.
Three formats of date are available. For details on the date format settings, see
display" on page
84 Faxing
81.
] to select <Date/time setting>, then press [OK].
(1)
138.
81.
81.
] or [ ] to move the cursor under the
"Date
Chapter 5