How to Navigate Menus on the LCD
*2
Appears only when the optional Bluetooth unit is attached to the machine.
Select template screen (See
Basic Operation on the Settings Screen
You can change the settings in each mode by pressing the Settings button, when printing in the copy
mode, fax mode, or memory card mode, or when saving scanned data on a USB flash drive in the scan
mode.
You can change the print settings such as page size, media type, image correction method, etc.
This section describes the procedure to change the settings, taking the procedure to specify
4"x6"(10x15cm) for the page size in the memory card mode as an example.
When printing from a computer, see
Note
To change the settings when printing from a PictBridge compliant device or wireless communication
device, refer to the on-screen manual:
1.
Display the settings screen.
(1)
Press the MEMORY CARD button to switch to the memory card mode.
Press the Settings button.
(2)
The Memory card settings screen will appear.
2.
Select the settings tab.
Use the
(Left) or
(1)
Example: Select Settings Tab 1 here.
3.
Select the setting item.
Use the
(Up) or
(1)
Example: Select A4 here.
Printing the Notebook or Graph Paper
Printing from Your Computer
.
Advanced Guide
(Right) button to select the settings tab.
(Down) button to select the setting item.
.)
.
Page 17 of 997 pages