Canon 3301B002 On-Screen Manual page 713

Summary of Reports and Lists
1.
Load paper.
Refer to
Loading Paper / Originals
2.
FAX
Press the
The FAX menu screen is displayed.
3.
Use the
4.
Use the
5.
Use the
The Caller history list is printed.
TX Report
This machine can print a TX (transmission) report after sending a document, confirming whether
the transmission has been completed successfully. At the time of purchase, TX reports are set to
be printed only when a transmission error occurred. You can set the machine to print a report each
time it sends a document, or disable printing of the report.
Note
For details on the TX report settings, see
For the errors that occur when you send a fax, see
Errors when you send a fax
If an error occurs when you send a fax, the error number is printed in the TX report (there are some
errors for which the cause is also printed).
The causes corresponding to the error numbers are as follows.
No.
#001 Document is jammed in
the ADF.
#003 Document is too long.
.
button, then press the Menu button.
button to select Print reports/lists, then press the OK button.
button to select Caller history list, then press the OK button.
button to select Yes, then press the OK button.
TX report
Cause
The document is jammed in the ADF.
Remove the document page jammed in the
ADF. When the error is cleared, redo the
operation. See
You attempted to send a document longer than
15.75 inches / 400 mm.
You cannot send a document longer than
15.75 inches / 400 mm from the ADF.
#003 is also printed if it takes time to send a
.
.
Errors when you send a fax
Action
Document Jams in the ADF
Page 713 of 997 pages
.