Canon 3301B002 On-Screen Manual page 685

Resending Faxes (Redialing a Busy Number)
> >
Advanced Guide Faxing Sending/Receiving Faxes Using the Operation Panel of the Machine
(Redialing a Busy Number)
Resending Faxes (Redialing a Busy Number)
There are two methods of redialing: Automatic redialing and Manual redialing.
Automatic Redialing
Manual Redialing
Automatic Redialing
If you send a document and the recipient's line is busy, the machine will redial the number after a
specified interval. Automatic redialing is enabled by default.
You can customize the following automatic redialing settings:
Whether or not your machine redials automatically
The number of times the machine redials (1 to 10 times)
The time interval between redials (1 to 99 minutes)
For details on the automatic redialing settings, see
Note
The range of values you can set for the automatic redialing settings varies depending on the
country or region of purchase.
To cancel automatic redialing, wait until the machine starts redialing, then press the Stop
button.
To cancel automatic redialing, delete the unsent document from the machine's memory
while the machine is on-standby for a redial operation. For details, see
.
in Memory
Manual Redialing
Follow the procedure below for manual redialing.
1.
Press the Redial/Pause button.
2.
Use the button to select the recipient's number to redial, then press the OK button.
3.
Press the Color button for color transmission, or the Black button for black & white
transmission.
Important
Color transmission is available only when the recipient's fax machine supports color
faxing.
Note
For manual redialing, the machine memorizes up to 10 recent recipients dialed using the
Numeric buttons. Note that the machine does not memorize any recipients dialed by one-
touch speed dialing (MX860 series) or coded speed dialing.
To cancel manual redialing, press the
.
Auto redial
Stop button.
Page 685 of 997 pages
> Resending Faxes
Deleting a Document
Page top