Advanced Settings; Bluetooth Settings - Canon 3301B002 On-Screen Manual

Machine Settings
Configures the IP version (IPv4 or IPv6). We recommend IPv4 for general use.
WSD setting
Switches the WSD (a network protocol supported by Windows Vista) configuration (Active or
Inactive).
Print LAN details
Print the network configurations on the machine.
Reset LAN settings
Sets the network configurations on the machine back to the default.

Advanced settings

Read/write attribute
Selects whether to use the Card Slot of the machine as the memory card drive of a computer.
Volume control
Adjusts the beep volume when pressing the buttons on the Operation Panel, or the alarm volume.
Country select
Selects the country where you are using the machine.
Note
This setting may not be available depending on the country or region of purchase.
Quiet mode
Enables this function if you want to reduce the operating noise of the machine, such as when using
the machine at night (when copying, printing from the PictBridge compliant device, printing with
wireless communication, etc.).
Key repeat
Enables to increase or decrease numbers rapidly by pressing and holding down the button when
inputting numbers. When this setting is disabled, holding down the button is the same as pressing
it once.
Two-sided output setting
Selects the paper output setting for double-sided documents.
If you select Fast - by back/front, documents are ejected from the ADF with the front and back pages
of each sheet in the reverse order, to make the processing time shorter.
Mobilephone print setting
Specifies paper, layout, etc. when you print from the wireless communication device. This setting
appears only when the optional Bluetooth Unit is connected to the machine.

Bluetooth settings

Changes the Bluetooth settings, such as the device name or passkey. This setting appears only
when the optional Bluetooth Unit is connected to the machine.
PictBridge settings
Specifies paper, print quality, etc. when you print from the PictBridge compliant device.
Page 105 of 997 pages