Canon 3301B002 On-Screen Manual page 131

Replacing an Ink Tank
Caution
Do not hold the Print Head Holder to stop or move it forcibly. Do not touch the Print Head Holder
until it stops completely.
Important
Do not touch the metallic parts or other parts inside the machine.
Do not place any object on the Document Cover. It will fall into the Rear Tray when the
Document Cover is opened and cause the machine to malfunction.
Do not hold the LCD or the Operation Panel.
If the Document Cover is open, you cannot open the Scanning Unit (Cover). Be sure to lift the
Scanning Unit (Cover) with the Document Cover closed.
If the Scanning Unit (Cover) is left open, the Print Head Holder moves to the right. In this case,
close and reopen the Scanning Unit (Cover).
Note
The machine may make operating noise when the Print Head Holder moves to the replacement
position.
3.
Replace the ink tank with the lamp flashing fast.
Push the tab (B) and lift the ink tank to remove.
Do not touch the Print Head Lock Lever (C).
Important
Handle the ink tank carefully to avoid staining of clothing or the surrounding area.
Discard the empty ink tank according to the local laws and regulations regarding disposal of
consumables.
Note
Do not remove two or more ink tanks at the same time. Be sure to replace ink tanks one by one
when replacing two or more ink tanks.
For details on ink lamp flashing speed, see
Checking the Ink Status
.
Page 131 of 997 pages