Connecting to a Computer
Memo
If the machine is not displayed by clicking [Restart
search], select [Printer name/IP Address] and
enter the IP address assigned to your machine, and
then click [Next].
If the [Windows Security] dialog box
11
appears, click [Install this driver
software anyway].
Click the [Exit] button.
12
Remove the "Software DVD-ROM" from
13
the computer.
The installation is complete.
Print a test page to check that the printer
driver is successfully installed on the
computer.
Click [Start] > [Devices and Printers].
1
Right-click the OKI MB491 icon and
2
select [Printer properties] (> a desired
printer driver if you have installed
multiple drivers) from the pop-up menu.
On the [General] tab, click [Print Test
3
Page].
Installing a Printer Driver
(For Mac OS X)
To complete the network connection with a Mac
operating system, install a printer driver on the
computer and set your machine as a network
printer.
Select the protocol for your network connection
from the following:
EtherTalk
Bonjour
Note
EtherTalk is not supported in Mac OS X 10.6 or later.
Disable the anti-virus software before starting this
procedure.
EtherTalk is not supported in Mac PCL.
Using EtherTalk (For Mac OS X
10.5)
When connecting to the network with EtherTalk,
it is necessary to enable EtherTalk in the
machine. Then, install the driver in the computer.
First, enable EtherTalk in the machine.
Ensure that your machine and the
1
computer are turned on and connected.
Reference
"Connecting an Ethernet Cable" P. 47
Press the <SETTING> key on the
2
operator panel.
Press the
3
and press
Enter the administrator password.
4
The factory default password is "aaaaaa".
Select [Complete], and press
5
Press the
6
and press
Press the
7
and press
Press the
8
press
.
OK
Press the
9
press
.
OK
Press the
10
displayed.
- 54 -
to select [Admin Setup],
.
OK
to select [Network Menu],
.
OK
to select [Network Setup],
.
OK
to select [EtherTalk], and
to select [Enable], and
until the top screen is
.
OK