Network Connection - Oki MB451wMFP User Manual

Network Connection

Perform the following procedure to connect your
machine to a computer via network.
Connecting using wired LAN
 Connecting an Ethernet Cable
Be sure to connect your machine to a network
with an Ethernet cable before driver installation.
Prepare an Ethernet cable and a hub.
1
Prepare an Ethernet cable (category 5, twisted
pair, straight) and a hub separately.
Hold down the power switch for about a
2
second to turn on the power and
computer.
Reference
"Turning Off Your Machine" P. 20

Plug one end of the Ethernet cable into
3
the network interface connection on the
back of the machine.
2
Plug the other end of the Ethernet cable
4
into the hub.
Connecting using wireless LAN
(MB451w, MB471w only)
 Configuring automatically using
push-button method
Use the WPS (push button) function to set the
wireless LAN.
Log in as the administrator.
1
Press the
2
and then press the
Press the
3
and then press the
Press the
4
Setting], and then press the
Press the
5
automatically (WPS)], and then press
the .
Press the
6
then press
Press the
7
press .
OK
- 47 -
Connecting to a Computer
to select [Network Menu],
.
to select [Network Setup],
.
to select [Wireless
.
to select [Set
to select [WPS-PBC], and
.
OK
to select [Yes], and then
1