Oki MB451wMFP User Manual page 36

Loading Paper and Documents
 Configuring the Tray Settings
After you load paper in tray 1, tray 2 (optional),
or the MP tray, you need to register the loaded
paper on your machine.
Press the <SETTING> key on the operator panel.
1
Press the to select [Paper Setup] and
2
then press .
OK
Press the to select the paper tray in
3
which you loaded paper and then press
Press the to select [Paper Size] and
4
then press .
OK
Press the to select the size of the
5
loaded paper and then press
Reference
 If [Custom] is selected for [Paper Size], you need to
register the custom size. For how to register the
custom size, refer to
Press the to select [Media Type] and
6
then press .
OK
Press the to select the type of media
7
loaded and then press
Press the to select [Media Weight]
8
and then press
Press the to select the weight of the
9
loaded paper and then press
Press the until the top screen is
10
displayed.
.
OK
"Registering Custom Sizes" P.
.
OK
.
OK
.
OK
 Registering Custom Sizes
To load custom size paper, you need to register
the width and length of the paper before printing.
The range of the sizes you can set differs
according to the paper tray.
Tray
Tray1
Tray2
(Optional)
(MB461,
MB471,
.
MB471w,
OK
MB491,
ES4161 MFP,
ES4191 MFP
only)
MP tray
(MB451/
MB451w/
MB471/
MB471w/
MB491/
ES4191 MFP)
36.
Manual
Feeder
(MB441/
MB461/
ES4161 MFP)
Note
 For tray 1 and tray 2, you can configure the [Custom]
setting only when [Paper Size] is set to [Custom].
 The available size range for duplex printing is the same as
that for tray 2.
Press the <SETTING> key on the
1
operator panel.
Press the
2
press
OK
Press the
3
which you loaded paper and then press
Press the
4
press
OK
- 36 -
Available size range
Width:
100 to 216 mm (3.94 to 8.5 inches)
Length:
148 to 355.6 mm (5.83 to 14.0
inches)
Width:
148 to 216 mm (5.83 to 8.5 inches)
Length:
210 to 355.6 mm (8.27 to 14.0
inches)
Width:
86 to 216 mm (3.4 to 8.5 inches)
Length:
140 to 1320.8 mm (5.5 to 52.0
inches)
to select [Paper Setup] and
.
to select the paper tray in
to select [Custom] and then
.
.
OK