Configuring Network Settings; Configuring Web Settings - Oki MC852 Network Manual

c
onfIgUrIng.web.settIngs
You can launch the web page to configure the printer's network setting.
enablIng.web.settIngs
1. Launch Configuration Tool.
2. Select Network Setting from Plug-in menu.
3. Click Discover Devices.
4. Select the printer from the list.
5. Click Device Settings icon.
6. Check Device Settings(Web) - Enable and click on OK.
7. Enter your password into Password and click on OK.
> The default password is the last 6 alphanumerical digits of the ethernet address.
> The password is case sensitive.
8. Click ok on the confirmation window.
The new settings are enabled when the printer restarts. During the restart, the printer
status icon changes to red. The printer network card will restart, the new settings will be
active, and the status icon will turn green.
oPenIng.the.web.Page
1. Launch Configuration Tool.
2. Select Network Setting from Plug-in menu.
3. Click Dicover Devices.
4. Select your printer from the list.
5. Click Display Web Page icon.
The web page will start, and the printer status page will be displayed.
Network configuration > 10