Settings For Each Dialing Type - Oki MB451wMFP User Manual

Basic Settings for Faxing (for MB451, MB451w, MB471, MB471w, MB491, ES4191 MFP only)
Connecting PBX, Home Telephone or
Business Phone
Plug the [Telephone cable] connected to the
[Public Line (Analog)] into the [LINE
connection] of your machine.
Remove the telephone connector cover.
Plug the telephone cable connected to a control
device including PBX, etc. into the [TEL
connection] of your machine.
LINE connection
Telephone cable
- Home Telephone -
A number of telephones are connected with one or
two telephone lines to allow internal and door
phone communication. This is simple switching
equipment for household.
- Business Phone -
More than two telephone lines can be
accommodated, and these telephone lines can be
shared with a number of telephones to allow
internal communication. This is simple switching
equipment.
TEL connection
Control device
including PBX,
etc.
Public Line
(Analog)
Connecting as an Internal Telephone
Plug the [Telephone cable] connected to a
control device including PBX, etc. into the [LINE
connection] of your machine.
LINE connection
Memo
 Set [PBX Line] to [ON]. Refer to

Settings for each dialing type

The factory default [MF (Tone)/DP (Pulse)] is
set to [Tone].
 For push-button phones, if you hear a "Beep, boop,
beep" sound, leave [MF (Tone)/DP (Pulse)] as
[Tone].
 For push-button type phones, if you do not hear a
"Beep, boop, beep" sound, or if you are using a
rotary-dial type phone, set [MF (Tone)/DP
(Pulse)] to [Pulse].
 How to Configure Settings
Press the <SETTING> key on the
1
operator panel.
Press the
2
and press
Enter the administrator password.
3
The factory default password is "aaaaaa".
Select [Enter], and press
4
Press the
5
and press
Press , select [MF (Tone)/DP
6
(Pulse)], and then press
Press , select Dial Type, and then press
7
.
OK
- 43 -
Control device
including PBX,
etc.
Telephone cable
"PBX Connecting" P.
to select [Admin Setup],
.
OK
.
OK
to select [User Install],
.
OK
.
OK
1
Public Line
(Analog)
45.