Scannable Area; Loading Documents - Oki MB451wMFP User Manual

Loading Paper and Documents

Scannable Area

The text or images on the shaded area shown
below are not scanned.
2 mm
Memo
 The arrow in the above drawing indicates the feeding
direction in the auto document feeder, or the scanning
start side on the document glass.

Loading Documents

Scanner Scannable
type size
ADF  A4
 A5
 B5
 A6*
 Letter
 Legal 13
 Legal 13.5
 Legal 14
 Executive
Document  A4
glass  A5
 B5
 A6
 Letter
 Executive
Note
 For documents using adhesives, ink, or correction fluid, set
them after checking that these have completely dried.
 Duplex scanning cannot be performed on paper indicated
by an "*".
2 mm
2 mm
2 mm
Paper Paper
capacity weight
50 sheets
60 to 105 g/m
2
(80 g/m ) (16 to 28 lb)
- 20 mm
 Loading Documents on the ADF
Load your documents face up on the ADF.
1
If your documents are portrait, load them with the
top edge of the documents in first.
If your documents are landscape, load them with
the left edge of the documents in first.
Adjust the document guides to the width
2
of your documents.
2
 Loading Documents on the Docu-
ment Glass
Lift and open the document glass cover.
1
Place a document face down on the
2
document glass.
If your document is portrait, align its top edge to
the upper-left corner of the glass.
- 38 -