Paper Output; Documents; Document Requirements - Oki MB451wMFP User Manual

Enter the desired value using the ten-key
5
pad and then press
Press the or to move to the next box.
Press the until the top screen is
6
displayed.

Paper Output

Your machine outputs to the facedown or faceup
stacker. Paper types that can be outputted to
each stacker are as follows.
Output Supported
Stacker paper type
Facedown  Standard
 Recycled
paper
When performing duplex printing, paper outputs
to the facedown stacker.
Note
 Do not open or close the faceup stacker while printing as it
may result in a paper jam.
 Using the Facedown Stacker
Delivers paper with the print side face down.
Note
 Check that the faceup stacker on the rear side of the
machine is closed. If the faceup stacker is open, paper is
always outputted to the faceup stacker.
.
OK
Paper output
capacity
 150 sheets (when
paper weight is less
2
than 80 g/m )
 Using the Faceup Stacker
Delivers paper with the print side face up.
Note
 The faceup stacker is not available in duplex printing.
Pull the faceup stacker on the rear side
1
of the machine and open it toward you.
Unfold the faceup stacker.
2

Documents

You can use the auto document feeder (ADF) or
the document glass to load documents for
copying, scanning or faxing.

Document Requirements

You cannot load the following documents on the
ADF. Use the document glass instead:
 Torn or perforated paper
 Curled or rolled paper
 Wet paper
 Static paper
 Carbon-backed paper
 Fabrics, metallic sheets or Transparency films
 Paper with staples, paper clips, ribbons, or tape
 Pasted paper, paper with glue
 Glossy paper
 Specially coated paper
Keep the following in mind to avoid damaging the
document glass:
 Do not hold a document firmly on the glass when
copying a thick document.
 Place hard documents gently.
 Avoid loading documents with sharp projections.
- 37 -
Loading Paper and Documents
1