Oki MB451wMFP User Manual page 56

Connecting to a Computer
 Using EtherTalk
(For Mac OS X 10.4.0 to 10.4.11)
When connecting to the network with EtherTalk,
it is necessary to enable EtherTalk in the
machine. Then, install the driver in the computer.
Memo
 The following procedure uses Mac OS X 10.4.11 as an
example. Depending on an OS, the description may be
different.
 First, enable EtherTalk in the machine.
Ensure that your machine and the
1
computer are turned on and connected.
Reference
"Connecting an Ethernet Cable" P. 47

Press the <SETTING> key on the
2
operator panel.
Press the to select [Admin Setup],
3
and press .
OK
Enter the administrator password.
4
The factory default password is "aaaaaa".
Select [Complete], and press
5
Press the to select [Network Menu],
6
and press .
OK
Press the to select [Network Setup],
7
and press .
OK
Press the to select [EtherTalk], and
8
press .
OK
Press the to select [Enable], and
9
press .
OK
Press the until the top screen is
10
displayed.
 Next, install the driver in the computer.
From the Apple menu, select [System
1
Preferences].
Select [Network].
2
Select [Network Port Configurations]
3
from [Show], and then check that
[Built-in Ethernet] is selected.
Select [Built-in Ethernet] from [Show]
4
and select the [AppleTalk] tab, and
then check that [Make AppleTalk
Active] is selected.
.
OK
Close [Network].
5
Insert "Software DVD-ROM" in the
6
computer.
Double-click the [OKI] icon on the
7
desktop.
Double-click [Driver] folder > [PS] Or
8
[PCL] folder > [Installer for Mac OSX].
Enter the administrator password, and
9
then click [OK].
Follow the instructions displayed on the screen to
complete the installation.
From the [Go] menu, select [Utilities]
10
and then double-click [Printer Setup
Utility].
 If [Printer Setup Utility] is already running, close it
- 56 -
Note
and open it again.