Show Interface Sme - Cisco AJ732A - MDS 9134 Fabric Switch Configuration Manual

show interface sme

S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
show interface sme
To display the information about Cisco SME interface, use the show interface sme command.
Syntax Description
slot
port
brief
counters
brief
description
Defaults
None.
Command Modes EXEC mode.
Command History Release
3.2(2c)
Usage Guidelines
None.
Examples The following example displays the brief description of the Cisco SME interface:
switch# show interface sme 3/1 brief
------------------------------------------------------------------------------
Interface
------------------------------------------------------------------------------
sme3/1
The following example displays the counters of the interface:
switch# show interface sme 3/1 description
sme3/1
Cisco MDS 9000 Family Storage Media Encryption Configuration Guide
A-36
show interface sme slot/port {brief | counters brief | description}
Identifies the number of the MSM-18/4 module slot.
Identifies the number of the Cisco SME port.
Displays the brief information about Cisco SME interface.
Displays the interface counters.
Displays brief counter information.
Displays the description of the interface.
Modification
This command was introduced.
Status
up
5 minutes input rate 0 bits/sec, 0 bytes/sec, 0.00 KB/sec
5 minutes output rate 0 bits/sec, 0 bytes/sec, 0.00 KB/sec
SME statistics
input 0 bytes, 5 second rate 0 bytes/sec, 0.00 KB/sec
clear 0 bytes, encrypt 0 bytes, decrypt 0
compress 0 bytes, decompress 0 bytes
output 0 bytes, 5 second rate 0 bytes/sec, 0.00 KB/sec
clear 0 bytes, encrypt 0 bytes, decrypt 0
compress 0 bytes, decompress 0 bytes
compression ratio 0:0
flows 0 encrypt, 0 clear
Cluster
c2
Appendix A Cisco SME CLI Commands
OL-18091-01, Cisco MDS NX-OS Release 4.x