Cisco AJ732A - MDS 9134 Fabric Switch Configuration Manual page 229

Appendix A Cisco SME CLI Commands
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
volgrp volume group
name
detail
summary
Defaults None.
Command Modes EXEC mode.
Command History Release
3.2(2c)
Usage Guidelines None.
Examples The following example displays the configuration details about a cluster:
switch# show sme cluster c1
Cluster ID is 0x2b2a0005300035e1
Cluster status is online
Security mode is advanced
Total Nodes are 1
Recovery Scheme is 2 out of 5
Fabric[0] is Fabric_name-excal10
KMC server 10.21.113.117:8800 is provisioned, connection state is initializing
Master Key GUID is 10af119cfd79c17f-ee568878c049f94d, Version: 0
Shared Key Mode is Not Enabled
Auto Vol Group is Not Enabled
Tape Compression is Not Enabled
Tape Key Recycle Policy is Not Enabled
Key On Tape is Not Enabled
Cluster Infra Status : Operational
Cluster is Administratively Up
Cluster Config Version : 24
The following example displays the cluster interface information:
switch# show sme cluster clustername1 interface it-nexus
-------------------------------------------------------------------------------
-------------------------------------------------------------------------------
10:00:00:00:c9:4e:19:ed,
2f:ff:00:06:2b:10:c2:e2
OL-18091-01, Cisco MDS NX-OS Release 4.x
Displays tape volume group name. The maximum length is 32 characters.
Displays Cisco SME cluster details.
Shows Cisco SME cluster summary.
Modification
This command was introduced.
Host WWN
Target WWN
VSAN Status Switch
4093 online switch
Cisco MDS 9000 Family Storage Media Encryption Configuration Guide
show sme cluster
Interface
sme4/1
A-41