Adding A Fabric And Changing The Fabric Name - Cisco AJ732A - MDS 9134 Fabric Switch Configuration Manual

Chapter 2 Getting Started
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
To configure Cisco SME in a dual fabric environment, all the switches in the cluster should have the same
Note
credentials for SME user.
Cisco SME requires the HTTPS protocol on the Cisco MDS 9000 switch with an MSM-18/4 module
installed. You must enable HTTPS during the Fabric Manager installation. To enable HTTPS, refer to
the installation information in the

Adding a Fabric and Changing the Fabric Name

You need to add the fabric that includes the Cisco MDS switch with the MSM-18/4 module installed. Or
you also can add a fabric that includes an MDS 9222i switch.
Cisco MDS SAN-OS Release 3.2(2c) or later, or Cisco NX-OS 4.x supports one cluster per switch. You
Note
will want to consider this during your planning.
To add a fabric using Fabric Manager Web Server, follow these steps:
Step 1 Log in to Fabric Manager Web Client.
Step 2 Click the Admin tab.
Click Configure.
Step 3
Click Add.
Step 4
The Add Fabric seed switch screen displays fields to log in to the fabric seed switch.
OL-18091-01, Cisco MDS NX-OS Release 4.x
Cisco MDS 9000 Family Fabric Manager Configuration
Cisco MDS 9000 Family Storage Media Encryption Configuration Guide
Before You Begin
Guide.
2-13