Sme Commands - Cisco AJ732A - MDS 9134 Fabric Switch Configuration Manual

Appendix A Cisco SME CLI Commands
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
debug sme
To enable debugging for the Cisco SME features, use the debug sme command. To disable a debug
command, use the no form of the command.
Syntax Description all
demux
vsan vsan id
deque
error
event
ha
trace
trace-detail
warning
wwn-janitor
disable
enable
set-timer-value
Defaults
None.
Command Modes
EXEC mode.
Command History Release
3.2(2c)
Usage Guidelines
None.
Examples
The following example displays the system output from the debug sme all command:
OL-18091-01, Cisco MDS NX-OS Release 4.x
debug sme {all | demux vsan vsan id | deque | error | event vsan vsan id | ha vsan vsan id | trace
vsan vsan id | trace-detail vsan vsan id | warning vsan vsan id | wwn-janitor {disable | enable
| set-timer-value}}
no debug sme {all | demux vsan vsan id | deque | error | event vsan vsan id | ha vsan vsan id |
trace vsan vsan id | trace-detail vsan vsan id | warning vsan vsan id | wwn-janitor {disable
| enable | set-timer-value}}
Enables debugging of all Cisco SME features.
Enables debugging of Cisco SME message demux.
Restricts debugging to a specified VSAN ID. The range is 1 to 4094.
Enables debugging of Cisco SME message dequeue.
Enables debugging of Cisco SME errors.
Enables debugging of Cisco SME finite state machine (FSM) and events.
Enables debugging of Cisco SME high availability (HA).
Enables debugging of Cisco SME trace.
Enables debugging of Cisco SME trace-detail.
Enables debugging of Cisco SME warning.
Displays Cisco SME WWN janitor related information.
Disables SME WWN janitor task timer.
Enables Cisco SME WWN janitor task timer.
Sets Cisco SME WWN janitor task timer value in microseconds. The range
is from 2000 to 240000.
Modification
This command was introduced.
Cisco MDS 9000 Family Storage Media Encryption Configuration Guide
debug sme
A-5