Selecting Transport Settings - Cisco AJ732A - MDS 9134 Fabric Switch Configuration Manual

Creating a Cisco SME Cluster Using the Cisco SME Wizard
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
For information about primary and secondary servers, see the
Center" section on page

Selecting Transport Settings

In the Transport Settings screen, to enable Transport Settings, select On. If enabled, specify the Trust
Point from the drop-down menu.
For more information about Trust Points, see the
To enable Transport settings, select On.
If On is selected in the Transport Setting, SSL is enabled on KMC with the following results:
•
•
To disable Transport Settings, select Off.
Cisco MDS 9000 Family Storage Media Encryption Configuration Guide
4-10
6-5.
New clusters are created. If Off is selected, cluster creation fails.
Previously created clusters are updated by enabling SSL with trustpoint on the switches. KMC
server connection state remains as 'none' until the cluster is updated.
Chapter 4
"High Availability Key Management
Cisco MDS 9000 Family CLI Configuration
OL-18091-01, Cisco MDS NX-OS Release 4.x
Cisco SME Cluster Management
Guide.