Cisco AJ732A - MDS 9134 Fabric Switch Configuration Manual page 191

Appendix A Cisco SME CLI Commands
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
clear fc-redirect config
To delete a FC-Redirect configuration on a switch, use the clear fc-redirect config command.
vt vt-pwwn
local-switch-only
Defaults
None.
Command Modes
EXEC mode.
Command History Release
3.2(2c)
Usage Guidelines
This command deletes configurations (including active configurations) on the FC-Redirect created by
applications such as Cisco SME and DMM. This command enables the host server to talk to the storage
array, which directly bypasses the individual Intelligent Service Applications (ISAs), and causes data
corruption.
You must use this command only as the last option to clear any left-over configurations which cannot be
deleted from the application (Cisco SME and DMM).
Use this command while decommissioning the switch.
Examples The following example clears the FC-Redirect configuration on the switch:
switch# clear fc-redirect config vt 2f:ea:00:05:30:00:71:64
Deleting a configuration MAY result in DATA CORRUPTION.
Do you want to continue? (y/n) [n] y
Related Commands Command
show fc-redirect active configs
OL-18091-01, Cisco MDS NX-OS Release 4.x
clear fc-redirect {config vt vt-pwwn local-switch-only}
Specifies the virtual target (VT) of the configuration to be deleted. The
format is hh:hh:hh:hh:hh:hh:hh:hh.
Deletes the configuration only on the local switch.
Modification
This command was introduced.
Description
Displays all active configurations on the switch.
Cisco MDS 9000 Family Storage Media Encryption Configuration Guide
clear fc-redirect config
A-3